DEFINITIVE PROSTHETICS · COWELLMEDI

INNO Multi Abutment

Abutment for screw-retained bridges and bars on Cowellmedi INNO implants. The restoration is taken and screwed at abutment level – straight as Multi S or angled as Multi A with 15° and 30° to compensate inclined implants.

WHY A MULTI ABUTMENT?

Screw-retained instead of cemented – even with inclined implants

Multi abutments raise the prosthetic connection to gingival level. The bridge is screwed onto the abutments instead of cemented: no excess cement in the sulcus and retrievable at any time. With the angled Multi A abutments, inclined implants – e.g. in All-on-4 or All-on-6 concepts – can be aligned to a common path of insertion. The gold-coloured surface supports an esthetic restoration.

VARIANTS

Multi S or Multi A?

ORDER NUMBERS

INNO Multi Abutments

Choose the gingival height according to the measured soft-tissue thickness.

Multi S · straight

Gingival height	Ø 4.5	Ø 5.5
1.0 mm	2SMS451	2SMS551
2.0 mm	2SMS452	2SMS552
3.0 mm	2SMS453	2SMS553
4.0 mm	2SMS454	2SMS554
5.0 mm	2SMS455	2SMS555

Multi A · angled

Gingival height	Ø 4.5 · 15°	Ø 4.5 · 30°	Ø 5.5 · 15°	Ø 5.5 · 30°
2.0 mm	2SMAH45152*	–	–	–
3.0 mm	2SMAH45153	2SMAH45303*	2SMAH55153	2SMAH55303
4.0 mm	2SMAH45154	2SMAH45304	2SMAH55154	2SMAH55304
5.0 mm	–	–	2SMAH55155	2SMAH55305

* These abutments require the short abutment screw 2SSHR400, all other Multi A use the standard screw 2SSHR300.

ACCESSORIES IN THE SHOP

Impression and screw fixation

Impression at abutment level.

Accessory	Use	Ø 4.5	Ø 5.5
Multi impression coping Hex	abutment-level impression	2SMH45	2SMH55
Multi impression coping Non-Hex	abutment-level impression for bridges	2SMN45	2SMN55
Abutment screw Multi A	standard length	2SSHR300	2SSHR300
Abutment screw Multi A, short	for abutments marked *	2SSHR400	–
Multi S driver	screwing in the Multi S abutment	KRMSD15L	KRMSD15L

FURTHER COMPONENTS

For lab, provisional and digital workflow

We supply these components from the Cowellmedi range on request.

Component	Use	Ø 4.5	Ø 5.5
Protection cap	gingiva protection during healing, provisional base	2SMPC45	2SMPC55
Multi lab analog	stone model	2SMA45	2SMA55
Multi digital analog	3D-printed model	2SMLA45	2SMLA55
Multi scan body Hex / Non-Hex	model and intraoral scan	2SMB001H · 2SMB001N	–
Multi Hybrid Ti-Base	CAD/CAM restoration at abutment level	2SMHT40H · 2SMHT45H	2SMHT55H
Titanium cylinder Hex / Non-Hex	provisional, bar	2STCH45 · 2STCN45	2STCH55 · 2STCN55
Multi cylinder screw	for cylinders, Ti-base and scan body	2SMCS100	2SMCS100

Ti-base and scan body are also available as Non-Hex versions (ending N).

WORKFLOW

From placement to screw-retained bridge

1. Select the Multi abutment by gingival height – for inclined implants Multi A with 15° or 30°.
2. Tighten the abutment to 30 Ncm, place a protection cap if needed.
3. Take the impression at abutment level with Multi impression copings – or digitally with the Multi scan body.
4. Fabricate the model with Multi lab analog or digital analog.
5. Fabricate the bridge or bar on cylinders or Ti-bases and screw it in with the cylinder screw.