Your cart is currently empty
The Neobiotech SINUS ALL Kit combines SCA Kit (crestal), SLA Kit (lateral) and implant placement instruments: S-reamer Ø 2.8–3.9, LS/C-reamer Ø 6.5, stoppers 1–12 mm, Aqua system for hydraulic membrane detachment.
Whether there is enough residual bone for the crestal approach or a lateral window is needed often only becomes clear during surgery. With the SINUS ALL Kit you have both routes at hand.
For the crestal approach: sinus drills, S-reamers, rotary elevators, stoppers, depth gauge, bone carrier and the Aqua system for hydraulic membrane detachment.
For the lateral approach: LS-reamer, C-guide, C-reamer, side cutter and three sinus elevators. Plus fixture drivers and torque wrench for implant placement.
The S-reamer has a special blade geometry: it cuts through the cortical layer of the sinus floor and leaves a thin bone disk in front of the membrane – without damaging it. Stoppers in 1 mm steps control the depth.
1. Measure residual bone height, first drilling 1 mm shorter with stopper (1,200 rpm, copious irrigation).
2. Proceed with the S-reamer in 1 mm steps until the floor is perforated.
3. Check perforation with the depth gauge.
4. Optional: detach the membrane hydraulically with the Aqua system.
5. Introduce graft material with the bone carrier and distribute it with the rotary elevator (80 rpm).
6. Final drilling and implant placement.
▶ More in the video: Neobiotech shows how to use the SCA Kit.
The LS-reamer opens the lateral wall with a small window close to the crest. Its tapered shape limits the drilling depth to approx. 3.5 mm, the central tip guides. Alternatively, the C-reamer lets you harvest a round bone lid.
1. Raise the flap and mark the window position with the C-guide.
2. Create the window with the LS-reamer or C-reamer (2,000 rpm, 20:1, copious irrigation).
3. Widen with the side cutter if needed.
4. Detach the membrane with elevator 1, lift with elevators 2 and 3.
5. Graft, cover the window with a collagen membrane, suture.
▶ More in the video: Neobiotech shows how to use the SLA Kit.
| Instrument | Ø (mm) | Ref. | Speed |
|---|---|---|---|
| CRESTAL APPROACH | |||
| Sinus drill | 2.2 · 2.8 · 3.2 · 3.7 · 4.0 | SAD22–SAD40 | 1,200 rpm |
| S-Reamer | 2.8 · 3.2 · 3.6 · 3.9 | SAR28–SAR39 | 1,200 rpm |
| Rotary elevator | 2.8 · 3.2 · 3.6 · 3.9 | SARE28–SARE39 | 80 rpm |
| Stopper | 1–12 mm | CDS010–CDS120 | – |
| Depth gauge | 2.6 · 3.1 | SADG01 | – |
| Bone carrier | 0.05 cc per load | – | – |
| Bone condenser | – | SABC01 | – |
| Aqua system (tap, valve, hose, syringe) | 1.0 · 2.2 | AQT · AQST | – |
| Drill handle | – | SADH01 | – |
| LATERAL APPROACH | |||
| LS-Reamer | 6.5 | SALS640 | 2,000 rpm (20:1) |
| C-Guide | – | SACG610 | 2,000–5,000 rpm |
| C-Reamer | 6.5 | SAC640 | 2,000 rpm (20:1) |
| Side cutter | 3.0 | SCT30 | 1,200 rpm |
| Lateral stopper | 1–4 mm | LTS010–LTS040 | – |
| Sinus elevators 1 · 2 · 3 | – | SLE01–SLE03 | – |
| IMPLANT PLACEMENT | |||
| Fixture driver ratchet short · long | – | ISFD10R · ISFD15R | – |
| Fixture driver contra-angle | – | ISFD05C | – |
| Hex driver 1.2 | – | HD1215S | – |
| Torque wrench | – | TW60 | – |
For hydraulic membrane detachment with the Aqua system we recommend the Omnifix®-F fine dosage syringe 1 ml – finely dosable with 0.01 ml scale, in a handy pack of 25.
To the fine dosage syringe →
Find the order you'd like to withdraw
Enter your email address and order number.
Check your mailbox
If your details match an order, you'll receive an email with a link to view and manage it.