INNO Hybrid Ti-Base S, L & A – Titanium Base for CAD/CAM

DIGITAL PROSTHETICS · COWELLMEDI

INNO Hybrid Ti-Base

Titanium base for CAD/CAM-made abutments and crowns on Cowellmedi INNO implants. The titanium connection ensures a precise, stable fit in the implant, the ceramic superstructure provides the esthetics – screw-retained or screw-cement-retained.

HYBRID S

Post 3.75 mm

standard

HYBRID L

Post 5.5 mm

more bonding surface

HYBRID A

up to 25°

angulated screw channel

SURFACE

Gold

for translucent ceramics

LIBRARY

exocad · 3Shape

incl. scan body

WHY A TI-BASE?

Titanium in the implant, ceramics in the visible zone

The Hybrid Ti-Base combines the precise titanium implant connection with a custom-made ceramic crown or abutment. The gold-coloured surface shows through less than grey titanium and supports a natural-looking, translucent restoration. Engineered anti-rotation features (flats or humps) keep the restoration stable on the base.

VARIANTS

Which Ti-base for which case?

HYBRID S

Hybrid S Ti-Base

Post height 3.75 mm – the standard solution for most single crowns.

Gingival heights 0.8 · 2 · 3 mm
Ø 4.0 and 5.0 mm, Hex and N-Hex
Ø 4.0 with lingual opening for better esthetics

HYBRID L

Hybrid L Ti-Base

Post height 5.5 mm – more bonding and retention surface for larger crowns.

Gingival heights 1 · 2 · 3 mm
Ø 4.0 and 5.0 mm, Hex and N-Hex
for tall crowns or ample space

HYBRID A

Hybrid A Ti-Base

For an angulated screw channel up to 25° – the screw access can be moved out of the visible zone.

Gingival heights 0.8 · 2 · 3 mm
Ø 4.0 mm, Hex and N-Hex
with Stargrip screws and angulated driver

ORDER NUMBERS

INNO Hybrid Ti-Base by type and gingival height

Gingival height = cuff height from the implant shoulder.

Hybrid S Ti-Base · post height 3.75 mm

Gingival height	Ø 4.0 · Hex	Ø 5.0 · Hex	Ø 4.0 · N-Hex
0.8 mm	2SLH404	2SLH504	2SLN404
2.0 mm	2SLH424	2SLH524	2SLN424
3.0 mm	2SLH434	2SLH534	2SLN434

Hybrid L Ti-Base · post height 5.5 mm

Gingival height	Ø 4.0 · Hex	Ø 5.0 · Hex	Ø 4.0 · N-Hex
1.0 mm	2SLH415	2SLH515	2SLN415
2.0 mm	2SLH425	2SLH525	2SLN425
3.0 mm	2SLH435	2SLH535	2SLN435

Hybrid A Ti-Base · angulated screw channel up to 25°

Gingival height	Ø 4.0 · Hex	Ø 4.0 · N-Hex
0.8 mm	2SLH404A	2SLN404A
2.0 mm	2SLH424A	2SLN424A
3.0 mm	2SLH434A	2SLN434A

N-Hex = version without anti-rotation. Further diameters (e.g. Ø 6.0 mm) and versions for INNO Sub Narrow on request.

ACCESSORIES

For scanning, model and screw fixation

What you additionally need for the digital workflow with the Hybrid Ti-Base.

Accessory	Use	INNO Sub Narrow	INNO
Hybrid scan body	for model and intraoral scanners, no powder	–	2SSB4325 · 2SSB4329
Digital analog	for 3D-printed models	SDR001N	2SDR001
Abutment screw	for Hybrid S and L Ti-Base	–	2SSHR200
Hybrid ball key	15 / 20 mm	–	KRBUD15 · KRBUD20

For the Hybrid A Ti-Base, Stargrip abutment screws (2SLAH100/200/300) and an angulated driver are used – on request.

PRACTICAL TIP: DIGITAL

Impression at implant level – digitally with a scan body or conventionally with impression copings
Select the library in your CAD software (exocad, 3Shape, Dental Wings)
Use the matching digital analog for printed models

PRACTICAL TIP: SCREW FIXATION

Torque as specified: 30 Ncm for INNO, 20–25 Ncm for INNO Sub Narrow
Tighten with the 1.2 mm hex driver and torque wrench
Use a lab screw in the laboratory and a new original screw intraorally

Downloads: Hybrid Ti-Base system (PDF) · Library & digital analog guide (PDF) · CAD/CAM libraries

Matching products: Lab analogs & screws → · Healing abutments →

Note: Selection, fixation and tightening torques depend on the individual situation and Cowellmedi's current instructions for use.

Shopping cart

Hybrid Ti-Base Cowellmedi