Your cart is currently empty
Cowellmedi MFS Kit (KSA004): crestal drills Ø 2.8–4.2 with stoppers 2–12 mm, hydraulic Aqua system, Ø 6 lateral reamer with stoppers and sinus elevators – direct and indirect sinus lift in one kit.
The crestal drills with flat end face open the sinus floor gently – even with an inclined or septated floor. The stopper is set to the bone height measured on CBCT; the Aqua system then lifts the membrane with saline.
1. Mark the perforation point with the point drill, guide hole Ø 2.2 mm.
2. Crestal drill with stopper matched to residual bone height – without CBCT start one step shorter and increase gradually (400–800 rpm).
3. Check depth with the depth gauge.
4. Fix the Aqua lifter drill with the ratchet, introduce saline via the tube – approx. 0.1 cc lifts the membrane by approx. 1 mm.
5. Introduce graft with the bone carrier and distribute with the condenser.
6. Prepare the implant site 1–2 mm deeper than the last crestal drill and place the implant – with less than 3 mm residual bone, graft only.
▶ More in the video: The crestal approach with the MFS Kit.
The Ø 6 mm lateral reamer has a rounded cutting edge that reduces the risk of membrane perforation. Lateral stoppers from 0.5 to 3 mm limit the depth to the wall thickness; the bone window can be repositioned after grafting.
1. Raise the flap, create the window with lateral reamer and stopper.
2. Finish with the lateral round drill.
3. Detach the membrane step by step with sinus elevators CSE-01, -02 and -03.
4. Widen the window with the side cutter (with stopper) if needed.
5. Graft, prepare the implant site and place the implant.
▶ More in the video: The MFS Kit at a glance.
| Instrument | Ø (mm) | Ref. | Speed |
|---|---|---|---|
| CRESTAL APPROACH | |||
| Point Drill | – | KPD01S | 800–1,000 rpm |
| Twist drill | 2.2 | KSTD22 | 800–1,000 rpm |
| Crestal Drill | 2.8 · 3.3 · 3.7 · 4.2 | KSCD28–KSCD42 | 400–800 rpm |
| Crestal drill stopper | 2–12 mm | – | – |
| Depth gauge (3/6/9/12 mm) | – | KDG001S | – |
| Aqua lifter drill | – | KSAL01 | – |
| Aqua tube and connectors | – | KSALT030 · KSAL01RC · KSAL01SC | – |
| Bone carrier | – | KSBC01 | – |
| Bone condenser | – | KSBC1022 | – |
| Torque wrench | – | KTW001 | – |
| LATERAL APPROACH | |||
| Lateral reamer | 6.0 | KSLD60 | 800–1,000 rpm |
| Lateral round drill | 6.0 | KSLRD60 | 800–1,000 rpm |
| Lateral stopper | 0.5–3 mm | KSDSL05–KSDSL30 | – |
| Side cutter | 4.0 | KSC60 | 800–1,000 rpm |
| Sinus elevators CSE-01 · 02 · 03 | – | KSSE01–KSSE03 | – |
| IMPLANT SITE | |||
| Implant drill stopper | 1–12 mm | KSDS01–KSDS12 | – |
For the Aqua system we recommend the Omnifix®-F fine dosage syringe 1 ml. For rotary osteotomy with tap drills, ridge split and bone condensing: the Cowellmedi Sinus Lift Kit.
Fine dosage syringe 1 ml → · Cowellmedi Sinus Lift Kit KSA001 →Find the order you'd like to withdraw
Enter your email address and order number.
Check your mailbox
If your details match an order, you'll receive an email with a link to view and manage it.